Here are some pictures of the finished three legged stools in post oak. The finish is danish oil and wax.
Below are some pictures of the second three legged stool of post oak. They are a pair but with differences. The rungs on this newest stool are in a “T” rather than forming a triangle connecting leg to leg as in the first. Also, the legs in this stool are a bit more cantankerous.
The legs dry fit with rungs.
Reaming for the legs.
The seat. I counted over 100 annual rings in this seat.
Fully assembled, and awaiting finishing touches.
Both stools together. Here you can see the difference in the rung layout, the “T” on one and the triangle on the other.
Below are some photographs from the process of the rough-shaping and bending (green) of post-oak, which is a variety of white oak, for use as legs in a pair of 3-legged stools -hopefully.
First the log was cut and split. This one has quite a of twist, which I am hoping to integrate into the design of the stools.
Next the halves are split into quarters and then into eighths with froe at the brake (no photos), then the eighths were trimmed with the hatchet.
After trimming the pieces are shaped down with drawknife at the horse.
After this rough shaping each piece was place in a form and bent using clamps, the clamps were removed after a few days and were replaced with wire. The legs will remain in the forms until they are dry and I am ready to shape them to final size.
For deep information on working with green wood please see Peter Follansbee’s blog.