The bright yellow carnage of green Osage Orange (Maclura pomifera).
Cutting bowl-blanks.
Osage Orange bowl on the lathe.
Building a deeper or longer tool-rest
logging and milling
Adze Ash, Carry Cottonwood
Rustic Rocker in Eastern Red Cedar
Cantilevered rocking chair in Eastern Red Cedar. Yet to be oiled in these photos, but I like the softness and light on the forms of the unfinished cedar.
Milling Red Elm
Milling a very hard but beautiful Red Elm tree (Ulmus rubra), also called Slippery Elm, on Sunday.
Jig for Flattening Slabs
I read about this method for flattening large slabs in a publication (Woodwork I think) a year or two ago. Unfortunately, I couldn’t find the article in order to reference it. As I work with irregular slabs, too large for my machines, I expect it to be a reasonable and effective method for flattening large slabs, in this case, eastern red cedar.
The router is mounted to a 4′ sled which rides across two parallel fences (jointed 2×4’s smoothed and waxed). The router has an 1-1/4″ straight cut bit, and mounted on the sled can cover the entire face of the slab, removing about 1/32″ of material per pass.
a couple of turned walnut handles help to steer
the whole endeavor sits on my table saw
Milling Lumber
We milled a large quantity of black walnut, red cedar, and green ash with a neighbor and his band-saw mill earlier this summer. Below are a few photos of our operation.
Some of the logs piled in the field.
Slabbing off a decent quality and sized black walnut log…
some of the boards 25″ wide…
some lead slugs from deep in one of the 100 plus year old red-cedars…
the slugs, still in the tree…
A hay loft full of lumber, almost everything was plain-sawn into boards and slabs from 4/4 up to a few 6″ slabs, all with natural edges remaining.
Green Ash Slabs
Milled a large Green Ash, Fraxinus pennsylvanica, log last week, which was recovered near Fall River, Kansas a little over a year ago.
Five 2.5″ slabs and two 1.25″.
Me holding one of the boards. The grain, although hard to see in the pictures is very nice.
Air Drying Quarter Sawn Red Oak
Below is a stack of mostly quarter sawn red oak Quercus rubra for air drying. There is some green ash under that pile too.
a detail of some of the “ray flecking” on one of the boards.
The stack under cover.
Milling Ash With a New Set-up
A carpenter ant infested green ash crotch being milled using a piece of heavy aluminum C-channel on sawhorses as a guide for the first cut. Also the standard 20 inch bar on the Stihl 039 has been replaced with a 24 inch bar and a rip-cut milled chain. The extra four inches and a new bar make a big difference in getting good true and flat cuts.
It would have been better had it not been filled with a colony of carpenter ants, but still nice wood.
A little better towards the edge, just not as interesting.
Milled Ash
A section of one of the many Ash logs in my yard waiting to be milled.
The School of the Transfer of Energy 